Asymmetric Static Generator

Note

Static generators should always have a positive p_mw value, since all power values are given in the generator convention. If you want to model constant power consumption, it is recommended to use a load element instead of a static generator with negative active power value.

Create Function

Input Parameters

net.asymmetric_sgen

Parameter	Datatype	Value Range	Explanation
name	string		name of the static generator
type	string	naming conventions: “PV” - photovoltaic system “WP” - wind power system “CHP” - combined heating and power system	type of generator
bus*	integer		index of connected bus
p_a_mw*	float	\(\leq\) 0	active power of the static generator : Phase A[MW]
q_a_mvar*	float		reactive power of the static generator : Phase A [MVar]
p_b_mw*	float	\(\leq\) 0	active power of the static generator : Phase B[MW]
q_b_mvar*	float		reactive power of the static generator : Phase B [MVar]
p_c_mw*	float	\(\leq\) 0	active power of the static generator : Phase C[MW]
q_c_mvar*	float		reactive power of the static generator : Phase C [MVar]
sn_mva	float	\(>\) 0	rated power ot the static generator [MVA]
scaling*	float	\(\geq\) 0	scaling factor for the active and reactive power
in_service*	boolean	True / False	specifies if the generator is in service.

*necessary for executing a power flow calculation
**optimal power flow parameter

Electric Model

Static Generators are modelled as PQ-buses in the power flow calculation:

The PQ-Values are calculated from the parameter table values as:

\begin{align*} P_{sgen} &= p\_mw \cdot scaling \\ Q_{sgen} &= q\_mvar \cdot scaling \\ \end{align*}

Note

The apparent power value sn_mva is provided as additional information for usage in controller or other applications based on panadapower. It is not considered in the power flow!

Result Parameters

net.asymmetric_sgen

Parameter	Datatype	Explanation
p_a_mw	float	resulting active power demand after scaling : Phase A [MW]
q_a_mvar	float	resulting reactive power demand after scaling : Phase A [MVar]
p_b_mw	float	resulting active power demand after scaling : Phase B [MW]
q_b_mvar	float	resulting reactive power demand after scaling : Phase B [MVar]
p_c_mw	float	resulting active power demand after scaling : Phase C [MW]
q_c_mvar	float	resulting reactive power demand after scaling : Phase C [MVar]

The power values in the net.res_sgen table are equivalent to \(P_{sgen}\) and \(Q_{sgen}\).