Simple pandapower Test Networks
Four load branch
- pandapower.networks.panda_four_load_branch()
This function creates a simple six bus system with four radial low voltage nodes connected to a medium voltage slack bus. At every low voltage node the same load is connected.
- OUTPUT:
net - Returns the required four load system
- EXAMPLE:
import pandapower.networks as pn
net_four_load = pn.panda_four_load_branch()
Four loads with branches out
- pandapower.networks.four_loads_with_branches_out()
This function creates a simple ten bus system with four radial low voltage nodes connected to a medium voltage slack bus. At every of the four radial low voltage nodes another low voltage node with a load is connected via cable.
- OUTPUT:
net - Returns the required four load system with branches
- EXAMPLE:
import pandapower.networks as pn
net_four_load_with_branches = pn.four_loads_with_branches_out()
Four bus system
- pandapower.networks.simple_four_bus_system()
This function creates a simple four bus system with two radial low voltage nodes connected to a medium voltage slack bus. At both low voltage nodes the a load and a static generator is connected.
- OUTPUT:
net - Returns the required four bus system
- EXAMPLE:
import pandapower.networks as pn
net_simple_four_bus = pn.simple_four_bus_system()
Medium voltage open ring
- pandapower.networks.simple_mv_open_ring_net()
This function creates a simple medium voltage open ring network with loads at every medium voltage node. As an example this function is used in the topology and diagnostic docu.
- OUTPUT:
net - Returns the required simple medium voltage open ring network
- EXAMPLE:
import pandapower.networks as pn
net_simple_open_ring = pn.simple_mv_open_ring_net()